HP DV6600 DRIVER

I have to try to open my laptop? I have not had a chance to try booting from a cd yet but I will. I wanted to say thanks so much! Also, Previously spoke to HP and they said my motherboard was bad and needed to be replaced. Just remove it from the laptop and put back in. I opened it with emergency open hole and then inserted a dvd and closed it.

Uploader: Brarisar
Date Added: 13 September 2008
File Size: 44.38 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 22289
Price: Free* [*Free Regsitration Required]

How to disassemble HP Pavilion dv, dv, dv, dv – Inside my laptop

Where can I get a tool to remove the studs in step 5? I read through your very well written step-by-step procedures and it was a breeze!

Thank you for your time! Only problem I had was remounting the mb back into the plastic bottom casing. I recommend disconnesting at power button board cover insteed other end. Pull both wireless card antenna cables through the opening in the top cover.

Warranty & Support

I opened it with emergency open hole and then inserted a dvd and closed it. I have then installed Windows 7 an since then I could not get my sound to work. Just blow air into the fan grill on the bottom until all dust is gone and test the laptop again. Don’t see what you’re looking for?

After using the towel trick wrap the laptop in a towel, turn on minus hard drive, leave for one hour to allow system to get VERY hot — hot enough to remelt solder on graphics core and fix problemI dismantled my laptop using your guide to replace the default thermal pad on the graphics chip with a copper spacer from eBay and some AS5. While fv6600 full disassembly instructions are quite ho, I am wondering if there are any shortcuts that can be taken if the only thing that one wants access to is the power board.

The fan speeds up like it does on normal startup and then it slows down to normal. Not sure if its relevant, but when I was cleaning I found a small spot of what looked like corrosion on the motherboard and I cleaned it off with a little bit of alcohol.

My question is, what do I need to buy to replace those? The wireless is always on. Then I mounted back in the reverse order. I am very appreciated you expertise.

I wanted to say thanks so much! Should I just check ebay? I recently replaced the keyboard on my laptop HP Pavilion DVse and in the process somehow managed to damage the power button cable. Sometimes it took me up to three tries so the laptop started. I replaced the keyboard, updated the drivers and bios. All in all, a great experience for a great price.

HP Pavilion dv6600 Series

Take a closer look at all connectors before disconnecting them. Amazon Restaurants Food delivery from local restaurants. Hello 1st sorry for my poor English and my spell mistake.

First, I would try reseating memory modules. I even replaced the audio board and still the same.

Laptop specification web blog: HP Pavilion dv Entertainment Notebook PC series- Models

My original intention was to np a small square piece of copper which i did, but the depth was wrong. Ok thaks so I decided to order artic silver 5 with their 1 and 2 step bottles as well.

Test the laptop with each memory module separately. Very clear and helpful.

When I apply artic silver 5 to cpu Do i have to spread it evenly with a card or just 1 drop then place fan and bolt it? The motherboard is now removed and shielded with foil to isolate the loose chip and protect the surrounding components dg6600 the heat. There was a problem filtering reviews right now.